Loading... Please wait...
Gas Detection Warehouse
You Tube Twitter Facebook
Call for best available pricing 1-866-451-2257

Honeywell Series 3000 Mkll and Mklll Transmitters with Sensors

  • Image 1
Price:
Call 866-451-2257 for Pricing and Configuration
Shipping:
Free Shipping


Call (866) 451-2257 for Pricing and Configuration.

Series 3000 Manual

Series 3000 Brochure + Datasheet

 

Series 3000 Mkll and Mklll Transmitters with Sensors

The Series 3000 range of transmitters provide comprehensive monitoring of toxic and Oxygen gas hazards in potentially explosive atmospheres. Suitable for mounting both indoors and out, they are available in two versions and offer excellent versatility.

The MkII is contained in a flameproof housing, has an intrinsically safe sensor connection and is for use in predominantly Zone 1 applications. However with the use of the optional remote mounting kit the sensor of the MkII can be mounted in a Zone 0 environment. The MkIII is for use with a separate suitable IS barrier allowing the complete transmitter to be used in Zone 0 applications.

These low powered gas detectors all feature a loop powered 4-20 mA connection, making them ideal for both new and retrofit installations. Users can configure the detector through the use of the easy to read LCD and intuitive interface while fault diagnostic software and a programmable calibration period greatly simplify maintenance procedures.

The intrinsically safe smart sensors are supplied pre-configured and can be ‘hot swapped’ without having to remove power to the detector, saving time and money during commissioning and routine servicing. A remote sensor mounting kit is available that allows the sensor to be mounted up to 15m (50ft) from the transmitter, making it ideal for operation in areas that are difficult to access.

Series 3000 is supplied with all necessary accessories for easy installation. The detector can be wall mounted using the integral mounting lugs or pipe mounted (horizontal or vertical) using the optional pipe mounting kit. Electrical installation is made using the  2 x M20 cable entries (ATEX/IECEx version) or 2 x ¾”NPT conduit entries (UL/c-UL versions).  A suitable blanking plug is also supplied to  seal any unused entries. A weatherproof cap  is also included for use in the harshest outdoor conditions.

 

Reliable detection
•  Proven electrochemical sensing technology
•  Uses Surecell™ electrochemical cells, ideal for hot and humid environments
•  Long-life sensing elements
•  Patented ‘Reflex’ sensing element verification diagnostics

Reduced installation costs
•  Integral surface mounting lugs
•  Optional horizontal or vertical pipe mounting bracket
•  Flameproof transmitter allows field wiring to be run along with other
    non-IS instruments
•  Plug-in sensor removes wiring
•  Can be retrofitted in place of Series 2000

Reduced commissioning costs
•  Sensor recognition software auto configures transmitter
•  Non-intrusive configuration
•  Plug and play factory configured sensors
 
Reduced maintenance costs
•  IS sensor connection permits hot swap, reducing downtime
•  User programmable calibration frequency
•  Integral fault diagnostic software
•  Menu/icon driven calibration procedure

Regulatory compliance
•  European (ATEX)
•  US (UL)
•  Canadian (c-UL)
•  International (IECEx)

Range of optional accessories
•  Remote sensor mounting kit
•  Duct mounting kit (for H2, CO and H2S only)
•  Calibration cup to apply test gas
•  Collecting cone

Typical applications
•  Exploration and drilling platform
•  Production platforms
•  Onshore oil and gas terminals
•  Refineries and chemical plants
•  Power plants
•  Waste water facilities
•  Utilities

 

  Order Number Price (USD)
UL/cUL approved Series 3000 MkII toxic and oxygen transmitter, aluminum LM25 and 2 x 3/4”NPT entries S3KUL2 $850.00
     
Toxic and Oxygen Smart Sensors Order Number Price (USD)
Ammonia (NH3) 0-1,000 ppm (200 to 1,000 ppm, 50 ppm) XNXXSA2SS $650.00
Ammonia (NH3) 0-200 ppm (50 to 200 ppm, 50 ppm) XNXXSA1SS $650.00
Carbon monoxide (CO) 0-300 ppm (100 to 999 ppm, 100 ppm) XNXXSC1SS $450.00
Chlorine (Cl2) 0-5.0 ppm (5.0 to 20.0 ppm, 5.0 ppm) XNXXSL1SS $550.00
Chlorine dioxide (ClO2) 0-1.00 ppm XNXXSX1SS $550.00
Hydrogen (H2) 0-1,000 ppm XNXXSG1SS $550.00
Hydrogen (H2) 0-10,000 ppm XNXXSG2SS $550.00
Hydrogen chloride (HCl) 0-10 ppm (10.0 to 20.0 ppm, 1.0 ppm) XNXXSR1SS $650.00
Hydrogen fluoride (HF) 0-12.0 ppm XNXXSF1SS $650.00
Hydrogen sulfide (H2S) 0-100 ppm (50 to 500 ppm, 10 ppm) XNXXSH2SS $450.00
Hydrogen sulfide (H2S) 0-15 ppm (10 to 50 ppm, 1ppm) XNXXSH1SS $450.00
Nitrogen dioxide (NO2) 0-10.0 ppm (5.0 to 50.0 ppm, 5.0 ppm) XNXXSN1SS $550.00
Nitrogen monoxide (NO) 0-100 ppm XNXXSM1SS $550.00
Oxygen (O2) 0-25% Vol. XNXXSO1SS $450.00
Phosphine (PH3) 0-1.2 ppm XNXXSP1SS $650.00
Sulfur dioxide (SO2) 0-15.0 ppm (5.0 to 20.0 ppm, 5.0 ppm) XNXXSS1SS $550.00
     
Replacement Toxic and Oxygen Sensor Cartridges Order Number Price (USD)
Cartridge ammonia (NH3) 0-1000 ppm (200 to 1000 ppm, 50 ppm) S3KA2SS $450.00
Cartridge ammonia (NH3) 0-200 ppm (50 to 200 ppm, 50 ppm) S3KA1SS $450.00
Cartridge carbon monoxide (CO) 0-300 ppm (100 to 999 ppm, 100 ppm) S3KC1SS $275.00
Cartridge chlorine (Cl2) 0-5.0 ppm (5.0 to 20.0 ppm, 5.0 ppm) S3KL1SS $375.00
Cartridge chlorine dioxide (ClO2) 0-1.00 ppm S3KX1SS $375.00
Cartridge hydrogen (H2) 0-10,000 ppm S3KG2SS $375.00
Cartridge hydrogen (H2) 0-1000 ppm S3KG1SS $375.00
Cartridge hydrogen chloride (HCl) 0-10 ppm (10 ppm to 20 ppm, 1 ppm) S3KR1SS $450.00
Cartridge hydrogen fluoride (HF) 0-12.0 ppm S3KF1SS $450.00
Cartridge hydrogen sulfide (H2S) 0-100 ppm (50 to 500 ppm, 10 ppm) S3KH2SS $275.00
Cartridge hydrogen sulfide (H2S) 0-15 ppm (10 to 50 ppm, 1 ppm) S3KH1SS $275.00
Cartridge nitrogen dioxide (NO2) 0-10.0 ppm (5.0 to 50.0 ppm, 5.0 ppm) S3KN1SS $375.00
Cartridge nitrogen monoxide (NO) 0-100 ppm S3KM1SS $375.00
Cartridge oxygen (O2) 0-25% Vol. S3KO1SS $275.00
Cartridge phosphine (PH3) 0-1.2 ppm S3KP1SS $450.00
     
Accessories For Use With Series 3000 MkII  
Horn & Strobe Accessories Order Number Price (USD)
Horn/Strobe 24 Vdc, 4 wire M-507437 $125.00
Horn/Strobe 24 Vdc, 2 wire M-512790 $118.00
Horn/Strobe 24 Vdc, 2 wire, high candela M-512791 $131.00
Horn/Strobe 24 Vdc, 2 wire, outdoor location M-512792 $167.00
Horn/Strobe 24 Vdc, 2 wire, outdoor location, high candela M-512793 $167.00
Horn/Strobe 24 Vdc, 2 wire, ceiling mount M-512795 $118.00
Horn/Strobe 24 Vdc, 2 wire, ceiling mount, high candela M-512796 $167.00

 

  Call for Pricing and Quotes:

  Phone: (866) 451-2257
  Fax: (805) 576-7629